Microsoft wireless router mn 500

Console Gaming. MN Features. WAN ports:. WAN port s type:. WAN port auto cross-over:. LAN ports:. LAN ports type:. LAN ports auto cross-over:. USB port s :. Serial port:. Parallel port:. NAT routing:. Port forwarding:. Port forwarding of ranges:. They are there so you can direct traffic at two devices on your network.

Let's say that you have two devices running Ftp servers on your network. Let's call these devices device one Let's also say both these ftp servers are running on port Okay we setup your router to forward port 21 to device one So every external IP address request from ftp goes to device one.

How do we get to the second device? Well the Inbound Port and Private Port entries allow us to specify another outside port to connect to our internal port Lets make the additional port, port We would now setup a rule in the router with the Public Port set to 30 and the Private port set to The IP address in that rule would be So when you wanted to ftp to device two you would specify port 30 in your ftp client.

The router would see these requests coming in on port 30 and forward them to This would allow you to ftp to both devices. When you're finished, click Apply near the bottom of the screen to save your changes. Now that you have forwarded ports on the Microsoft MN you should test to see if your ports are forwarded correctly.

To configure the Wireless Base Station as a wireless access point, follow these steps:. Connect the Wireless Base Station to a computer for configuration. Because it is more secure, set up the base station through a wired connection first, and then switch to a wireless connection.

Start the Base Station Management Tool. In the logon box, type your password. The default password is admin. Click Wireless , and then click to select the Enable wireless access check box. If you want to change the wireless channel, click a number in the Wireless channel number list box. If you want to change the network name, type a new network name in the Wireless network name SSID box.

The network name is case sensitive and cannot be greater than 32 characters. The Security menu appears in the center pane. On the Security menu, click Wireless Security. In the Encryption strength list box, click either bit or bit. In the first upper left Key box, type an encryption key. Encryption keys contain hexadecimal digits that are numbers 0 through 9 or letters in the range A through F.

If you selected bit encryption, set the key index to 1 in the Key index list box. The key index number indicates which of up to four WEP keys are enabled on the network. If you want to limit wireless access so that only certain computers can connect, configure MAC filtering now. As soon as you turn on bridging, you cannot access the Base Station Management Tool, the interface that you use to configure the Wireless Base Station.

On the Security menu, click Network Mode. To save your changes, click Apply. When you are prompted to confirm the switch to bridging mode, click OK to continue. The base station resets itself, and then the base station enters bridging mode. Throughput tests Measured in Mbps longer bars indicate better performance Chariot Ethernet Chariot For our wireless testing, the clients and routers are set up to transmit at short ranges and maximum signal strength.

Response time measures how long it takes to send a request and receive a response over a network connection. Throughput and response time are probably the two most important indicators of user experience over a network. Internet Routers Culture. Throughput tests Measured in Mbps longer bars indicate better performance. HP wireless gateway hnw Microsoft wireless base station Response time Measured in milliseconds shorter bars indicate better performance. HP wireless gateway hnw 3.