Ibm t22 owners manual

If the operating system cannot boot normally, or if you cannot get access to the Product Recovery program, you can use the Recovery Repair diskette to boot the computer. Make a Recovery Repair diskette and save it for future use. To make a Recovery Repair diskette, do the following:. At the prompt, press F The option to press F11 appears for only a few seconds. You must press F11 quickly.

The Product Recovery program main menu opens. Note: If you are prompted to select the operating system, select one you want to recover. Then the Product Recovery program main menu opens. Select System Utilities from the main menu. Press Enter. Select Create a Recovery Repair diskette. Follow the on-screen instructions. To use the Product Recovery program to restore the pre-installed software, do the following:.

Save all files and shut down the desktop. Turn on the computer. While the message is displayed, quickly press F Here again it appears very briefly; watch for it, and press F11 before it disappears.

Note: If this message is not displayed, you can use a Recovery Repair diskette to get access to the Product Recovery program. From the list displayed on the screen, select the operating system you want to recover. Select the recovery options you want, and follow the instructions on the screen.

When the Product Recovery program finishes running, the computer will restart with the pre-installed operating system, drivers, and software. Note: Network drivers are not automatically restored with Windows NT 4. The computer will restart with the pre-installed operating system, drivers, and software. To create the service partition and install the preloaded system from the recovery CD, do the following:. Boot with the recovery CD and the boot diskette if required.

Note: If the hard-disk drive contains any partitions, you do not receive this message; go to step 1. Press Y key. The service partition is created and loaded with the Product Recovery program files.

Note: If you do not want to create the service partition, press N key, and then go to step 8. At next window, press Enter to continue. The system automatically reboots during this process. You may be prompted to change CDs. Continue to step 6 to install preloaded system. Product Recovery program Reinstall the Product Recovery program?

If you get a message asking which operating system to install, select the proper operating system and press Enter. Press Enter to select. On each of the next three windows, press the Y key.

Follow the prompts to complete the recovery. Shut down and turn off the computer. Insert the Recovery Repair diskette into the drive, and then turn on the computer. If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on.

The computer does not start until the password is entered. Exception: If only an SVP is installed, the password prompt does not appear when the operating system is booted. A power-on password POP protects the system from being powered on by an unauthorized person. The password must be entered before an operating system can be booted. The system administrator then provides the user HDP to the system user. If it has, it can be used for access to the hard-disk drive.

The hard-disk drive can be replaced for a scheduled fee. Attention: If the SVP has been forgotten and cannot be made available to the servicer, there is no service procedure to reset the password.

The system board must be replaced for a scheduled fee. Turn on the computer and wait until the POST ends. After the POST ends, the password prompt does not appear. The POP has been removed. Reinstall the backup battery and the battery pack. Turn on the computer by pressing and holding F1. Enter the SVP. Select Password , using the cursor keys to move down the menu. Select Power-On Password.

When the Enter New Password field opens, leave it blank and press Enter twice. In the Changes have been saved window, press Enter. Press F10; then, in the Setup confirmation window, select Yes. Attention: If User only mode is selected and the user HDP has been forgotten and cannot be made available to the servicer, IBM does not provide any services to reset the user HDPs or to recover data from the hard-disk drive.

Power on the computer by pressing and holding F1. Select Hard-disk x password , where x is the letter of the hard-disk drive. A pop-up window opens. Select Master HDP. Select Yes in the Setup Configuration window.

To reduce power consumption, the computer has three power management modes: screen blank, standby, and hibernation. When the computer enters standby mode, the following events occur in addition to what occurs in screen blank mode:.

Even if you do not set the low-battery alarm, the charge indicator notifies you when the battery is low, and then the computer enters the power-saving mode automatically. This default low-battery behavior is independent of the operating system; so if you have set the low-battery alarm, the computer may not do what you specified. It chooses either your setting or the default setting, whichever is appropriate. If you are using the ACPI operating system, only the low-battery alarm is available.

To cause the computer to return from standby mode and resume operation, do one of the following:. Also, the computer automatically returns from standby mode and resumes operation in either of the following events:. Note: The computer does not accept any input immediately after it enters standby mode.

Wait a few seconds before taking any action to reenter operation mode. Note: If the computer enters the hibernation mode while it is docked to the docking station, do not undock it from the docking station before resuming normal operation. If you do undock it and then try to resume normal operation, you will get an error message, and you will have to restart the system.

Also, the computer goes into hibernation mode automatically in either of the following conditions:. When the power is turned on, the computer returns from hibernation mode and resumes operation. The hibernation file in the boot record on the hard-disk drive is read, and system status is restored from the hard-disk drive. Use the following procedures as a guide in identifying and correcting problems with the ThinkPad computer.

Note: The diagnostic tests are intended to test only IBM products. The use of non-IBM products, prototype cards, or modified options can lead to false indications of errors and invalid system responses. Identify the failing symptoms in as much detail as possible.

Verify the symptoms. Try to re-create the failure by running the diagnostic test or by repeating the operation. You can detect errors by running the diagnostics test included in PC-Doctor. This section is an overview of the procedure. For some possible configurations of the computer, PC-Doctor might not run correctly.

Note: When you initialize the computer configuration, some devices are disabled, such as the serial port. If you test one of these devices, you will need to enable it by using PS2.

PC-Doctor cannot be used to test a device that is in the docking station, even if the computer supports the docking station. To test the Ultrabay device, install it in the Ultrabay slot of the computer.

Note: In the following procedure, you can select an item not only with the arrow keys, but also with the TrackPoint. Instead of pressing Enter, click the left button. Insert the PC-Doctor disk into the diskette drive; then power on the computer. On the first screen, select the model and press Enter. Follow the instructions on the screen. The main panel of PC-Doctor appears. Select Diagnostics with the arrow keys, and press Enter.

Each key should be held down for at least 2 seconds; otherwise, it cannot be sensed. To test it, use the audio device test in the Other Devices in. Some models do not have them. Run the applicable function test. If there is a problem, PC-Doctor shows messages describing it. To exit the test, select Quit — Exit Diag.

To cancel the test, press Esc. Check that power is supplied when you power on the computer. Disconnect the ac adapter and install the charged battery pack. Check that the battery pack supplies power when you power on the computer. If you suspect a power problem, see the appropriate one of the following power supply checkouts:.

Unplug the ac adapter cable from the computer. Measure the output voltage at the plug of the ac adapter cable. See the following figure:. If the voltage is not correct, replace the ac adapter. If the voltage is acceptable, do the following: v Replace the system board. Note: Noise from the ac adapter does not always indicate a defect. Perform operational charging. If the battery status indicator or icon does not turn on, remove the battery pack and let it return to room temperature. Reinstall the battery pack.

If the charge indicator or icon still does not turn on, replace the battery pack. If the charge indicator still does not turn on, replace the system board. Then reinstall the battery pack.

If it is still not charged, go to the next section. I doubt that your problem is related to the fan or CPU. First of all, make sure your problem is related to the video chip. Try booting your laptop with an external monitor. I bought it from a friend, and it had no accessories to show me how to fix other uses.

It is giving me a good service, and I would like to get its Manual Book, so that I can know how to use on some items like printer, scaner and picture sending out, etc. Your co operation will be highly appreciated. Screen inverter replacement. Fixing laptop backlight problem. If the laptop is working fine except the battery charge LED, maybe there is something wrong with the inverter?

Just a guess. I have a ibm thinkpad T41 fu my built on speakers do not work I can plug exterior speakers in and they work. Recently, when I switch from AC to battery power unplug the cord with computer running , after a few minutes, the computer freezes and I need to reboot to get it started. Computer also appears to be running slower. The computer ran fine with these batteries for over a year. What happens if you start the laptop from the battery when the AC adapter is unplugged?

Will if freeze too or it happens only when you unplug the adapter while the laptop is running? My ibm z60m does not show anything on the screen.

It comes on, but nothing happens further. I note that it gives me an error code , but cannot find anthing on the web. Can anyone please help me in this regard or direct me as to where i can find out what the code means or what the problem is? How do you know the error code is if nothing appears on the screen?

Hi,I have a problem on my mother board Z61m. The card is no power because it has a short on pin 5 of PQ Can someone suggest me a solution for my problem? Kindly send aa user manuals available to correct the issue. Could you please pin point how to fix this, thanks. Could you please pin point how to fix this.

That sounds like a problem with the motherboard. Unfortunately, there is not much you can do. The problem is it will not turn on using the power button but if I press the space bar or press down around the red-blue-red buttons it powers up but as soon as I take my hand away it goes off. Please help — thanks!

When i Press the power button the system fan spins at an constant speed and nothing comes up on screen. There are also no beeps that deal with the system, if it beeped at all.

Is my Motherboard fried? The last time i used it battery light was flashing but my power lead was plugged in. It wont work with power lead at all could the lead be the fault? I recently stopped some services in the System Configuration Tool.

I cannot get them to start again. I cannot see where this is done. Also, is there a way to get prior restore dates back if you shut the restore feature off and then put it back on? I cannot access the restore points prior to the shutdown date, even though they are highlighted as restore points. Then it will start to make these beeping sounds I think 8 times …. What should I do?

I have a Thinkpad R60 that was fine until recently. Any ideas? What do I need to do to make sure I have the I should ahve now? I am having a strange problem with my thinkpad. When I removed the power supply and rebooted it.. But as soon as I connect it with Adapter it got shut down and the same problem persists as earlier.

Is that a problem with adapter or motherboard.. Shall I try connecting with adapter without battery.. FOr the time being I am shutting it down and charge for some time and then remove adapter and boot again. You cannot tell which one is causing the problem without testing the laptop with a known good adapter. Could be bad adapter or motherboard problem.

The the sereen is locked after IBM sereec. I am somewhat electronically savvy and own appropriate ESD equipment such as a desk mat and wrist strap.

Recently I bought a replacement DC power jack which is a pretty straight-forward affair: square cube with female screw hole and power cable with Molex-type plug for the inverter.

I have downloaded the Feb IBM Maintenance Manual but, other than it showing the location of the DC jack it provides no guidance as to what procedure I should use for disassembling the laptop. It is specific about most of the internals but the closest reference is the procedure for replacement of the inverter. Can you recommend what specific subsection I need to be using for instructions from the HMM that will enable me to replace the DC power jack?

Thanks a million! I have the T I push the power button, all the light, bells and whistles goes on… and then nothing happens. The thing is the screen doesnt go on. All laptop disassembly instructions are in the HMM. Download the maintenance manual for T Go to Removing and replacing a FRU on the page I have an R32 Laptop that will not boot up normally. IBM screen comes up with F1 and F12 choices, but goes nowhere. Go to the BIOS setup menu and make sure the hard drive is the first bootable device in the order.

If not, make it the first device, save settings and reboot the laptop. Test if it helps. The the screen is locked after IBM screec. It wants password. How do I get into windows. Is there any master key to unlock the password? Let me know as early as you can. I have IBM R ThinkPads are very secure laptops. I have an old IBM Thinkpad that is only used as a platform to run things thru a data projector.

Once connected, the keyboard will type numbers rather than letters for certain keys. Any help? I have a and this problem has only recently showed up over the past month and have tried resetting the BIOS and have recently updated the windows security updates. All with no luck. I tried replacing the memory, also did not help. Any other ideas?

Really weird problem. Also, could be a bad hard drive I guess. Maybe the laptop freezes because it overheats? Try cleaning the cooing fan and heat sink. Find a can of compressed air and blow it into the fan. This will remove most dust from the cooling module. Test laptop again. Does it help? Yes, it is a simple fix.

You have to disable NumLk. Hold down the Shift key and at the same time press once on the NumLk key. Hey guys i have got a ibm thinkpad r31 the problem i am having is the speakers dont work and if i plug in headphones they dont work.

Press on the Shift key and hold it down. At the same time press once on the NumLk key. This will disable num lock function.

I want to buy hard ware for laptop IBM E. I have a IBM thinkpad r I am getting black and white evenly spaced vertical lines. I would like to get this fixed so i can pass it on to my son for school. The hard drive light comes on and that is as far as it goes. I have tried another hard drive in it and its the same. Have taken the bios battery out. Still the same. Can you still use laptop with the projector or external monitor? Im using a IBM thinkpad a21m laptop. Hi; I recently got an almost new IBM x laptop, great picture, screen, everything.

I can run Linux off of cd rom, works great. If I try to download windows.. Thanks for sharing the link with us. I will have to check some of them out. Unplug AC adapter. Remove battery. Push on the power button for a few seconds. Install the AC adapter and try turning it on again. This could be memory failure. Try reseating memory modules. Try removing memory modules one by one and test the laptop with each memory module separately.

I have T60 IBM laptop. When i want to charge it, it starts charging and auto starts in a ninute and after that stops charging. Please help me out. Can anyone help with this error or problem,plz. Skip to Main Content. Joseph Pafume January 13, Katie January 23, Branislav Jandric February 16, RWF February 19, Branislav Jandric February 22, Jean-Francois Perreault February 28, Ken March 7, JW March 13, Yonko Stoimenov March 16, Ken March 26, Mike Hodson April 17, Eugene mwamwembe May 6, Paul James May 9, William July 1, Daniel Bolduc July 9, Pete September 9, Daniel October 8, KG October 8, DRC October 20, Shab October 27, Kelash November 17, Daniel November 19, Felix November 29, Felix December 1, DRCray December 5, John P December 7, James December 9, Mohammad Nassir December 9, Asif Iqbal December 22, Anatoly December 29, Norbert January 6, Courtney January 8, Casual Computing 1 Items 1.

Gaming 1 Items 1. Parts 1 Items 1. RAM Size. Screen Size. Storage Type. Not Specified 1 Items 1. New 51 Items Used 45 Items Please provide a valid price range. Buying Format. All Listings Accepts Offers Auction 1. Buy It Now Shipping Options. Free International Shipping. Local Pickup.